The ATC coating machines are designed specifically for the flatbed printing market. Available in both 60" and 80" coating width, the units provide high speed, dry to dry protective lamination for digital ink-jet images printed with various types of inks including UV, solvent, and water-based.

The units coat both flexible and rigid substrates up to 3" thickness. They feature super sized rollers to assure precise, full width, edge to edge coating with a speed range from 30 to 110 feet per minute. Coating thickness is adjustable to 0.3 to 0.8 mil. The built in triple liquid delivery system handles two liquids and a cleaning fluid. All three liquids are filtered. The liquid metering roller and bottom roller scraper are pneumatically controlled. The machines also feature an ingenious, 9 nozzle air separator system to allow light weight materials to be coated without sticking problems.

UV60 Specifications
Coating
Coating Width: 60"
Full Roller Width: 66"
Roller Coating Height: 0-3"
Measured Coating Thickness: 0.3 to 0.8 mills
Coating Speed: 30 to 110 feet per minute
Reservoirs (2 Lacquer, 1 Alcohol): 5 gallons each

Machine Dimensions
L36" x W105" x H62"

Electrical Requirements
230 VAC Single Phase
20 Amps

Compressed Air
100 PSI
1 CFM
(Machine available with air compressor)

Additional Resources
Owner's Operation Manual

UV80 Specifications
Coating
Coating Width: 80"
Full Roller Width: 90"
Roller Coating Height: 0-3"
Measured Coating Thickness: 0.3 to 0.8 mills
Coating Speed: 30 to 110 feet per minute
Reservoirs (2 Lacquer, 1 Alcohol): 5 gallons each

Machine Dimensions
L39" x W128" x H62"

Electrical Requirements
230 VAC Single Phase
20 Amps

Compressed Air
100 PSI
1 CFM
(Machine available with air compressor)

Additional Resources
Owner's Operation Manual